If you want to reduce your equipment's downtime, different repairs have to be done. Your machinery's hydraulic systems are the most important components and the most vulnerable to wear and problems like blown seals. You need to know how to deal with the problems like a blown hydraulic cylinder seal to minimize downtime. The following hydraulic seal replacement information will help you with getting the problems fixed quickly.
Routine hydraulic system inspections—The best way to ensure your equipment stays in operation is to do routine inspections and catch problems when they need to be repaired. The following problems are issues that you want to look for when inspecting the hydraulic systems of your equipment:
- Bent arms and cylinders
- Old grease buildup due to minor leaks
- Worn seals and gaskets that need to be replaced soon
These are problems that you will want to look for when inspecting your equipment. Identify worn seals and areas where leaks could potentially start to make repairing problems easier and quicker. If there are severe leaks that are visible, repair them before using the equipment.
Locating leaks and shutting equipment down—The leaks in your equipment can cause serious problems. Leaking hydraulic systems can also cause hazards that could cause injuries. So, you want to locate the leaks and shut down the equipment to ensure that there are no hazards while work is being done.
Removing the old and damaged hydraulic seal—The old hydraulic seal is going to have to be removed before it can be replaced and you can complete the repairs. The following steps will help you remove the cylinder and seal that is causing problems:
- Put equipment in a resting position
- Drain and store the hydraulic pump fluids
- Remove the hydraulic cylinder that needs new seals
- Remove old seals and clean the hydraulic cylinder components
These steps will help you remove the cylinder and hydraulic seals that are causing problems with your equipment.
Installing a new seal and testing the hydraulic system—The last step in the hydraulic repair process is to reinstall the hydraulic seal. Once the seal has been replaced, you are going to want to reinstall the parts and fill the system with fluid. Test the system before you start operating your equipment again to ensure everything is working smoothly.
You want to know this information about repairing the damaged hydraulic systems on your equipment. Call a hydraulic seal replacement service for help with repairs to your equipment.
To learn more about hydraulic seals, contact a resource like HyVal Industries Inc.